Power Grit Utility Saw
- 890PG Hyd PowerGrit Saw
- PowerGrit Pipe Clamp
- 695XL Petrol PowerGrit Saw
If you’re looking for the highest level of performance and cutting capability, look no further. The 890PG hydraulic utility chain saw offers cutting depths up to 25” in ductile iron, cast iron, PVC, HDPE, Insituform lining and even Asbestos* concrete pipe. The deep cutting ability of the 890PG with PowerGrit utility chain, allows the operator to make a single cut from one side meaning less excavation is required. Change the way you cut pipe! Also the 890PG is capable of operating the full line of 890F4 ProFORCE™ concrete cutting chains, meaning you can use the saw on masonry, stone, and even reinforced concrete - perfect for pipe taps, utility vaults, bridge work, and other utility applications.
Weight | 27.3 lbs (12.4 kg) with 15-inch (38 cm) bar and chain |
Bar Length | Up to 25 in (63 cm) |
Motor Speed | 6100 rpm |
Powerhead Dimensions | 23 in (58.5 cm) length 10.5 in (26.5 cm) height 9.5 in (24 cm) width |
Torque | 122 in-lbs (13.8 Nm) |
Horsepower | 11.5 hp (8.6 kW) |
Hydraulic Supply | 8 gpm (30 lpm), 2500 psi (172.5 bar) |
Noise Level | 98 dB @ 3 ft (1 m) (Sound pressure level) 107 dB @ 3 ft (1m) (Sound power level) |
Vibration Level | 2.0 m/second2 (front handle) 6.0 m/second2 (rear handle) |
Water Supply | Minimum 20 psi (1.5 bar) |
In addition to the time saving value of PowerGrit®technology, the pipe clamp accessory developed for the underground pipe application brings a whole new level of safety, accuracy and ease of use to the job. With a simple adaptor, you can mount to this clamp and dramatically reduce the effort of handling the saw, while providing a solid, stabile cutting platform that also improves operator safety and the precision of the cut.
Weight | 20.25 lbs. |
Height | 16.5 x 16.5 x 7 inch |
Max Pipe Size | Up to 12 inch pipe |
For Use With | 880F4/PG with PowerGrit Chain |
The new 695XL features include an easy to start engine with higher energy ignition system and durable, long-lasting components including a new muffler, carburetor and piston & cylinder. Available with 12-inch (30 cm) - 16-inch (40cm) guidebars and the entire line of MAX, ProForce and PowerGrit series diamond chains. Based on the best-selling 695 saw platform, the 695XL is the highest horsepower ICS gas saw for frequent-use by general construction, utility contractors and concrete professionals.
Engine Type | 2-stroke, Air Cooled |
Displacement | 94 cc (5.7 cu-in) |
Horsepower | 4.8 kW (6.4hp) @ 9000 rpm |
Torque | 5.7 Nm (50.4 in-lbs) @ 7,200 rpm |
Engine Speed | 9,300 +/- 150 rpm (max) 2,700 +/- 100 rpm (idle) |
Chain Speed at Maximum Power | 28 m/s (5500 ft/min) |
Weight | 9.5 kg (21 lbs) powerhead only |
Dimensions | 46 cm (18") length, 36 cm (14") height, 30cm (12") width |
Starter | Recoil, dust and water resistant |
Ignition | Special water resistant electronic ignition |
Fuel Ratio | 2% (50:1) gasoline-to-oil |
Fuel Capacity | 1 litre (0.26 gallon) |
Water Supply Requirement | Minimum 1.5 bar (20 psi) |
Water Flow Requirement | Minimum 4lpm (1gpm) |