This site requires a JavaScript enabled browser. Please enable Javascript or upgrade your browser to access all the features.

Keel Cutters

Designed to cut steel, cast iron, ductile iron, asbestos cement and plastic pipe.

The cutter is powered from a hydraulic power pack and automatically tracks around the pipe, cutting through the pipe wall as it travels.

2 models available:

N450
N600

Features
Specification

Approved by National Grid Gas
Cutter automatically tracks around the pipe
Cuts steel, cast iron, ductile iron, asbestos, cement and plastic pipe
Fast cutting time-typically 8 minutes to cut a 300mm diameter cast iron pipe
Only 200mm to 250mm clearance required (depending on model)
Works in water if required
Different blades available for different pipe materials (diamond, tungsten tipped)
Lightweight-easy to set up and operate

	Keel Cutter - N450		Keel Cutter -N600
Suitable Types of Material	Steel, Cast Iron, Ductile Iron, Asbestos, Cement, Plastic
Pipe Diameter (nominal o/d)	200 mm to 750 mm 900 mm with extension chain		250 mm to 1500 mm
Cutting Speed (approx.)	140 mm per minute		100 mm per minute
Coolant	Water sprayed at all times (oil/ water mix with steel pipes)
Dimensions	190 mm high x 350 mm wide x 300mm length		340 mm high x 530 mm wide x 450 mm long
Weight	20 kg		36.5 kg
Hydraulic Unit
Oil Feed	20 litres per minute		30 litres per minute
Maximum Pressure	140 bar (2000 PSI)		140 bar (2000 PSI)
Blade Type
	Blade Size	Cutting Performance	Blade Size	Cutting Performance
Diamond Cuts - Cast/ Ductile Iron	125 mm	up to 20 mm wall thickness	200 mm	up to 50 mm wall thickness
	150 mm	up to 32 mm wall thickness
Tungsten Carbide Tipped (TCT) Cuts - Steel	125 mm	up to 20 mm wall thickness	200 mm	up to 50 mm wall thickness
PE Cutting Blade	160 mm	up to 35 mm wall thickness	200 mm	up to 50 mm wall thickness